Some recent picture

Finishing TX and New Kit

Pres Monitor Stack

After performing a wheel tranplant from another rack.
The monitors are mounted on slide out rails

Work on distribution unit - pt 145

We moved our entire unit downstairs to the now empty pres room, and setup. We then did a complete test of our VTR, bug's WSS insertors and matrix routing system, which helped iron out some problems.
We also did some work on audio monitor unit, and had some problems getting out SDI/AES de-emebers working correctly with the Axis matrix.

Pres Distribution Unit

Top: Musa patch panel C&D,

Below: SDI TSG, is over patched to a DDA,
then some outputs are patched to the
front panel aswell for quickly patching

Below: SDI TSG, is over patched to a DDA,
then some outputs are patched to the
front panel aswell for quickly patching















Power Distribution One

Probel Panel
SCID Digital Audio Monitor

We have to use 75Ω to 110Ω impendance convertors

in this setup, due to the program outputs of our
SDI de-ember being AES over BNC/75Ω Coax.
However the inputs for our digital audio monitor
are AES over XLR/110Ω Twisted Pair.

We have also started cabling power up to each unit,

from each power distro panel.

Delicious Cable Spaghetti

We have started to wire up our distrobution trolley.
From top to bottom:
DAC
Axis Matrix
SDI/AES Embers and De-embers
SDI DDAs
Control PC













Rear of front over patch panel

Tearing apart Pres

Starting removing all the SDI monitors from Pres today.
This will all mostly be rack mounted and used to monitor feeds and sources in our new set-up for Matter.